There was a problem transferring instructions from our previous website. While we clean these posts up, we have made our old instruction sections available.
Here
  • Candy Cane Bracelet Kit Instructions

    Candy Cane Bracelet Kit Instructions

    0 comments
    Begin by centering one of your closed rings onto your wire.   Bring the ends of your wire together and string 1 red bicone, followed by a crimp tube.  Pull tightly and crimp.  Separate your wires, adding a white bicone and silver bead on the top wire, and a red bicone and silver bead on the bottom wire.   Cross your wires through a red bicone, pulling tightly, and adding...
  • Ginger Bread Man Earring Kit Instructions

    Ginger Bread Man Earring Kit Instructions

    0 comments
    Begin by removing the protective coating from your gingerbread men.Open your jump ring.Add your gingerbread man, and closed ring to the jump ring.Close your jump ring.Attach your ear wire, and repeat for your second earring.
  • Shimmer and Shine Bracelet Kit Instructions

    Shimmer and Shine Bracelet Kit Instructions

    0 comments
    Stretch out your elastic, then string 6mm briolette, 5mm rondell, quartz bead, 5mm rondell, 6mm briolette, 2mm round, 8mm briolette 2mm round. Repeat to your last 6mm briolette.   Complete your knot, and hide the knot under your large hole silver bead. 
  • String of love Bracelet Kit Instruction

    String of love Bracelet Kit Instruction

    0 comments
    Begin by cutting 8 inches off of your cord and setting aside (This will be used to create the bracelet closure later).Cut the remaining cord into 2 equal halves.Using glue, or a lighter, stiffen the ends of your 2 cords, and use nipper to cut on an angle.Next, take 2 ends of 1 of your cords, and bring them up through the CZ connector....
  • Magnificent Moonlight Bracelet Kit Instructions

    Magnificent Moonlight Bracelet Kit Instructions

    0 comments
    Cut your wire into 2 equal pieces.In the center of your wires load a crimp tube, and large silver round.Sepetate your wires, and add a small round, and bicone on each.Start your pattern following the first image.Add a bicone, and small round to each wire. Bring wires together through a large silver round and crimp.Tighten your pattern and crimp the ends.On both the left...
  • Twilight Sparkle Earring Kit Instructions

    Twilight Sparkle Earring Kit Instructions

    0 comments
    Cut your wire in half.Set your crimp covers to the side.On one half, center a gold bead.Bring the ends of your wire together and string a turquoise bicone, and gold bead.Separate wires, and on each wire string a turquoise bicone, gold round, 3 jet bicones, a gold round, and a turquoise bicone.Bring wires together, and pull tightly.Take both wires through your turquoise bicone. Add your...
  • Crystal Delight Earring Kit Instructions

    Crystal Delight Earring Kit Instructions

    0 comments
    Cut your leather in half, then cut each half in half.Cut ends of leather on an angle, and slide into your first set of end caps.Flatten to secure in place.Slide on your Swarovski bead.Take the second side of your leather,  load into end cap and adjust as needed to match the photo of the kit.Open your jump rings and attach your end caps.Make any...
  • Pretty in Pink Bracelet Kit Instructions

    Pretty in Pink Bracelet Kit Instructions

    0 comments
    Add your clasp, followed by a bicone and crimp onto your wire. Back through those bead, pulling wire tightly and crimping.Begin stringing the bracelet. Crystal Round / Indent bead / Crystal Round / Silver round / Bead Cap / Football / Bead Cap / Silver RoundRepeat to your last crystal round.Add your crimp tube, bicone, and closed ring.Back through to your bicone bead, pulling tightly and...
  • Sparkle Skull Halloween Earring Kit

    Sparkle Skull Halloween Earring Kit

    0 comments
    Begin by removing the protective coating from your skulls and cross bones.Open up your jump rings.Connect the bones to the skull, and close jump ring.Connect the skull to the ear wire, and close jump ring.Repeat for your second earring.
  • AMETHYST CHAROITE BRACELET KIT INSTRUCTIONS

    AMETHYST CHAROITE BRACELET KIT INSTRUCTIONS

    0 comments
    Begin by stretching your elastic cord. Begin pattern with the amethyst bead to the right of the sterling silver multi-cut (Make sure to add a silver round between each bead excluding the large multi-cut). Follow image for pattern. Add your large multi-cut bead, and knot your cord.
  • Petite Fall Tube Earring Kit

    Petite Fall Tube Earring Kit

    0 comments
    Following the color pattern in the image. Add 3 bicones a tube and 3 additional bicones to your head pin Wrap your head pin, trimming excess wire, and add your ear wire.Repeat for your second earring.
  • Petite Fall Bracelet Kit Instructions

    Petite Fall Bracelet Kit Instructions

    0 comments
    On your wire, add your clasp, crimp tube and bicone to your wire.  Back your wire through, pulling tightly and crimping.  Begin your pattern following the image above (silver round / tube / silver round / swarovski round). Repeat until your last tube.  Add your crimp tube and clasp.Back your wire through, pulling tightly, and crimping.  Trim excess wire, and add crimp covers.  Use jump rings to add safety chain.
  • Golden Shadow Fine Rock Tube Bracelet Kit Instructions

    Golden Shadow Fine Rock Tube Bracelet Kit Instructions

    0 comments
    Begin by string a briolette bead, crimp tube, bicone and clasp onto your wire.Back through your bicone crimp and briolette.Begin your pattern (there are additional beads if you require a larger size.You will need to mold your bead caps around your fine rock tube. Use your fingers to pinch all sides in.Saucer / Bicone / Saucer / Briolette / Saucer / Bicone / Saucer...
  • Paradise Shine Fine Rock Tube Bracelet Kit Instructions

    Paradise Shine Fine Rock Tube Bracelet Kit Instructions

    0 comments
    Begin by stringing a round bead, crimp tube, round and clasp onto your wire.Back through your round, crimp and round.Begin your pattern (there are additional beads if you require a larger size.)You will need to mold your bead caps around your fine rock tube. Use your fingers to pinch all sides in.Briolette / Saucer / Round / Saucer / Round / Saucer / Briolette...
  • Illuminating Swarovski Indicolite Bracelet and Earring Kit Instructions

    Illuminating Swarovski Indicolite Bracelet and Earring Kit Instructions

    0 comments
    BraceletBegin by stringing a briolette, crimp tube and 4mm bicone onto your wire.  Add your clasp.  Back through your beads.  Pull tightly and crimp.Begin your pattern.silver bead, bicone, silver bead, tube, silver bead, briolette,squaredell, cube squaredell, briolette, silver bead, briolette,squaredell, cube squaredell, briolette, silver bead, briolette,squaredell, cube squaredell, briolette, silver bead, tube, silver bead, bicone, briolette, crimp tube, and bicone.Add your ring, and back...
  • Mini Ornament Christmas Earring Kit

    Mini Ornament Christmas Earring Kit

    0 comments
    On your head pin add a red half bead, green rondell, clear half bead, red rondell, clear half bead, green rondell, red half bead.Wrap your head pin.Trim excess wire.Attach your ear wire.Repeat for second earring.
  • Winter Snowflake Pendant Kit Instructions

    Winter Snowflake Pendant Kit Instructions

    0 comments
    Center 7 pendants on your wire. Double your wire to form your snowflake, bringing wires up. Tighten your form by twisting your wire. Stringing a large hole round, a (saucer, bicone or briolette), rondell, and a(saucer, bicone or briolette). Create half an earring wrap, adding your closed ring and completing the wrap.  Finish the pendant by using your crimp cover to conceal your wrap. 
  • Victorian Chic Bracelet Kit

    Victorian Chic Bracelet Kit

    0 comments
    Being by stretching your elastic cord.       Start your pattern following the diagram below               Create a knot following the provided diagram between your large Rondell and gold saucer. Trim excess elastic cord. Kit Pattern.
  • Candy Cane Christmas Bracelet Weave Kit Instructions

    Candy Cane Christmas Bracelet Weave Kit Instructions

    0 comments
    Begin by centering one of your closed rings onto your wire.   Bring the ends of your wire together and string 1 red bicone, followed by a crimp tube.  Pull tightly and crimp.  Separate your wires, adding a white bicone and silver bead on the top wire, and a red bicone and silver bead on the bottom wire.   Cross your wires through a red bicone, pulling tightly, and adding...
  • Silver Bells Christmas Earring Kit Instructions

    Silver Bells Christmas Earring Kit Instructions

    0 comments
    Step 1) Cut your chain in half, and make sure you have an even amount of links on each half. Determine the length you want your earrings.  Step 2) Take your headpin and load your beads in the following order.  Silver Round ~ Cone Bead ~ Rondell ~ Silver Round  Step 3) Start your gallery wrap. Add to one end of your  chain and then complete your...