There was a problem transferring instructions from our previous website. While we clean these posts up, we have made our old instruction sections available.
Here
  • Ginger Bread Man Earring Kit Instructions

    Ginger Bread Man Earring Kit Instructions

    0 comments
    Begin by removing the protective coating from your gingerbread men.Open your jump ring.Add your gingerbread man, and closed ring to the jump ring.Close your jump ring.Attach your ear wire, and repeat for your second earring.
  • Twilight Sparkle Earring Kit Instructions

    Twilight Sparkle Earring Kit Instructions

    0 comments
    Cut your wire in half.Set your crimp covers to the side.On one half, center a gold bead.Bring the ends of your wire together and string a turquoise bicone, and gold bead.Separate wires, and on each wire string a turquoise bicone, gold round, 3 jet bicones, a gold round, and a turquoise bicone.Bring wires together, and pull tightly.Take both wires through your turquoise bicone. Add your...
  • Crystal Delight Earring Kit Instructions

    Crystal Delight Earring Kit Instructions

    0 comments
    Cut your leather in half, then cut each half in half.Cut ends of leather on an angle, and slide into your first set of end caps.Flatten to secure in place.Slide on your Swarovski bead.Take the second side of your leather,  load into end cap and adjust as needed to match the photo of the kit.Open your jump rings and attach your end caps.Make any...
  • Sparkle Skull Halloween Earring Kit

    Sparkle Skull Halloween Earring Kit

    0 comments
    Begin by removing the protective coating from your skulls and cross bones.Open up your jump rings.Connect the bones to the skull, and close jump ring.Connect the skull to the ear wire, and close jump ring.Repeat for your second earring.
  • Petite Fall Tube Earring Kit

    Petite Fall Tube Earring Kit

    0 comments
    Following the color pattern in the image. Add 3 bicones a tube and 3 additional bicones to your head pin Wrap your head pin, trimming excess wire, and add your ear wire.Repeat for your second earring.
  • Illuminating Swarovski Indicolite Bracelet and Earring Kit Instructions

    Illuminating Swarovski Indicolite Bracelet and Earring Kit Instructions

    0 comments
    BraceletBegin by stringing a briolette, crimp tube and 4mm bicone onto your wire.  Add your clasp.  Back through your beads.  Pull tightly and crimp.Begin your pattern.silver bead, bicone, silver bead, tube, silver bead, briolette,squaredell, cube squaredell, briolette, silver bead, briolette,squaredell, cube squaredell, briolette, silver bead, briolette,squaredell, cube squaredell, briolette, silver bead, tube, silver bead, bicone, briolette, crimp tube, and bicone.Add your ring, and back...
  • Mini Ornament Christmas Earring Kit

    Mini Ornament Christmas Earring Kit

    0 comments
    On your head pin add a red half bead, green rondell, clear half bead, red rondell, clear half bead, green rondell, red half bead.Wrap your head pin.Trim excess wire.Attach your ear wire.Repeat for second earring.
  • Silver Bells Christmas Earring Kit Instructions

    Silver Bells Christmas Earring Kit Instructions

    0 comments
    Step 1) Cut your chain in half, and make sure you have an even amount of links on each half. Determine the length you want your earrings.  Step 2) Take your headpin and load your beads in the following order.  Silver Round ~ Cone Bead ~ Rondell ~ Silver Round  Step 3) Start your gallery wrap. Add to one end of your  chain and then complete your...
  • Pretty in Pink Earring Kit Instructions

    Pretty in Pink Earring Kit Instructions

    0 comments
    On your eye pin, add the following.  Large Bicone / Bead Cap / Small Bicone / Briolette / Small Bicone / Bead Cap / Large Bicone  Wrap your eye pin. Open your jump ring, and add your ear ring, and pendant.   Close jump ring.  Attach your ear wire to the other side of your earring.  Trim excess wire.  Repeat for second earring.
  • Golden Candle Christmas Earring Kit Instructions

    Golden Candle Christmas Earring Kit Instructions

    0 comments
    Begin by adding your clear half bead to your headpin. (Flat side facing up)Add your contour bead.Add your foiled half bead. (Flat size facing down)Add your green Rondell.Add your candle stick, followed by your bicone. Wrap your headpin and attach your ear wire.Trim excess wire.Repeat for your next ear ring.
  • Nut Cracker Christmas Earring Kit Instructions

    Nut Cracker Christmas Earring Kit Instructions

    0 comments
    On your headpin add your larger jet flat bead, 2 bicones, a lucerna, beadcap, pearl, squaredell, cube and small flat bead. Wrap your headpin, and trim excess wire. Attach to your ear wire and repeat for your second earring.
  • Scarecrow Earring Kit Instructions

    Scarecrow Earring Kit Instructions

    0 comments
    On your headpin load a  jet half bead, 2 4mm tangerine briolettes, an olivine lucerna, silver bead bap, 6mm briolette, copper cap, saucer bead, and 3mm round. Wrap both headpins and trim excess wire.  Attach to your ear wire, and repeat for your second earring.
  • Christmas Wreath Earring Kit Instructions

    Christmas Wreath Earring Kit Instructions

    0 comments
    1) Cut your wire into 2 equal pieces, setting 1 piece to the side for your second earring.2) String 8 emerald rounds on to your wire.3) Create your loopRun the left side of your wire through all 8 round beginning with the right most bead while running the right side of the wire through all 8 rounds beginning with the left most bead.  This...
  • Turtle Dove Christmas Earring Kit Instructions

    Turtle Dove Christmas Earring Kit Instructions

    0 comments
    1) Begin by unpacking your kit, and peeling off the protective coating on your doves.2) On your eye pin, add a bicone, bow, bicone, and wrap the pin.  3) Trim excess wire.4) Open your jump ring.5) Attach your dove, and bottom of your eye pin to your jump ring.6) Close Jump ring.7) Attach your ear wire.8) Use a small amount of glue to attach...
  • Lil Rudolph Christmas Earring Kit Instructions

    Lil Rudolph Christmas Earring Kit Instructions

    0 comments
    1) Remove the protective coating from your wood bead.2) Open your sparkle jump ring, and add the color to Rudolph.3) Close jump ring.4) Open your plain jump ring, and connect it to Rudolph and your closed ring.5) Attach each wire.6) Use E-6000 to glue nose into place.
  • Thanksgiving Turkey Earring Kit

    Thanksgiving Turkey Earring Kit

    0 comments
    Begin by removing the protective paper from your turkeys.  Load your bicones onto your headpins and wrap, trimming excess wire.  Open your large jump ring. Add your turkey, along with a yellow, red and green bicone.Add your small closed ring and close your jump ring.  Attach the closed ring to the ear wire to allow them to dangle.  Repeat for your second ear ring.
  • Pretty with Pearls Earring Kit Instructions

    Pretty with Pearls Earring Kit Instructions

    0 comments
    1) Begin by loading a pearl, and a dome crystal onto your head pin start your wrap add your pearl finding and finish you wrap.Repeat for your second earring.
  • Sparkling Snowflake Earring Kit Instructions

    Sparkling Snowflake Earring Kit Instructions

    0 comments
    1) Remove protective coating from your snowflakes.2) Open your jump ring, and connect the snowflake to the bottom of your eye-pin.3) On your eye-pin add your Half bead, Rondell, and another half bead.4) Wrap and trim excess wire.5) Attach your ear wire.
  • Aurora Earring Kit Instructions

    Aurora Earring Kit Instructions

    0 comments
    Step 1) On your head pin, add the following.Silver round / Top Drill / Top Drill / Squaredell / Top Drill / Top Drill / Squaredell / Top Drill Top Drill / Silver roundStep 2) Make sure the head pin is close to what you see in the image above to create a tight wrap.Step 3)  Create a gallery wrap (see illustration) and trim...
  • Star Light Earring Kit Instructions

    Star Light Earring Kit Instructions

    0 comments
    Step 1) Open your jump rings.Step 2) Connect your star following the image above.Step 3) On the top hole of the top star add a jump ring, and attach your closed ring.Step 4) Attach the ear wire to the closed ring.
You have successfully subscribed!
This email has been registered