Create your own delicate and elegant bracelet with the Too cute Beads Petite Infinity Bracelet Kit! This dainty infinity symbol design is perfect for beginners and makes a beautiful everyday piece or thoughtful gift.
Materials Included in Your Kit
- Silver chain
- Infinity symbol charm
- Crystal round beads
- Multi-cut crystal beads
- Eye-pins
- Jump rings
- Safety chain
- Magnetic clasp
Tools you’ll need: bent-nose pliers, and wire cutters.
Step-by-Step Instructions
- Cut off two 2-inch pieces of chain and set the remaining chain aside for your safety chain.
- Open 1 eye-pin loop and connect it to 1 side of 1 piece of your 2-inch chain and close.
- Add the following beads: a multi-cut → crystal round → multi-cut → crystal round → multi-cut.
- Wrap your eye-pin leaving a loop large enough to add to your jump ring
- Repeat on the other side of your bracelet..
- On the remaining end of 1 of your chains, connect another eye-pin. Add a multi-cut, crystal round, multi-cut, crystal round, and multi-cut. Wrap the eye-pin leaving a large enough loop to fit onto your jump ring.
- Open your jump ring and add your eye-pin, safety chain, and magnetic clasp.
- Repeat on the other side.
Tips for Best Results
- Work on one side at a time to keep everything even.
- Make sure your eye-pin loops are large enough to move freely but not so loose they slip off.
- Double-check the length before closing the final jump ring.
- Use pliers gently so you don’t scratch the silver chain or crystals.
0 comments