Steps:
-
Prepare Your Wire:
- Unpack your kit and center your clasp on your wire.
-
String Bicone and Crimp Tube:
- Bring the ends of the wire together and string a 4mm bicone, a crimp tube, and another 4mm bicone onto the wires.
-
Separate the Wires:
- Now separate your wires and add a small silver bead on each wire.
-
Add Your Chaton:
- Position your Chaton between the two silver beads.
-
Create the Pattern:
- Add two more silver round beads followed by a bicone and another silver round on each side of the wire.
- Repeat this pattern until you have used all of your Chatons.
- Add 2 more silver rounds.
-
Bring Wires Together:
- After the last set of silver rounds, bring your wires together through a 4mm bicone, a crimp tube, and another 4mm bicone.
-
Add Chain:
- Attach your chain to the gathered wires.
-
Secure the Pattern:
- Bring your wires back through the 4mm bicone, crimp tube, and the other 4mm bicone.
- Pull tightly and crimp to secure.
- Trim any excess wires.
-
Adjust Chain Length:
- Measure and decide how much chain you need and adjust accordingly.
-
Create the Pendant:
- On your head pins, add a 4mm bicone, a silver round, and another 4mm bicone.
- Start your wrap at the end of your chain, complete your wrap and trim any excess wire.
Final Step:
Check all connections to make sure they are secure and that all excess wire has been trimmed away. Your elegant Rose Glitter Jewelry piece is now ready to be worn!