Mixed Metals Gemstone Drop Bracelet Kit Instructions

Set aside your smallest gold jump ring, and open all the rest of your rings  

Cut 3 equal lengths of chain    

 Take a large gold jump ring Add 1 end of your 3 chain pieces  

Close your jump ring    

Count down 9 links, and cut on the 10th   

Make sure all chain are face the same direction, taking care to remove any twist in the chain.  

Add a gold jump ring to the 3 9 link piece of chain and add your longer pieces of chain and close.  

Again, cut on the 10th link, straighten chain carefully again Add another gold  jump ring and your 3 longer pieces of chain.  

 Close.   

Repeat to your last gold jump ring.   

Use your 2 small silver jump rings to attach your small gold ring to one of the large  gold rings at the end of your bracelet.   

At this point, if you wear a 7 inch bracelet, simply add your clasp the the large gold jump on the other side of your bracelet.   

 For a large size, do the following. 

Use 1 or 2 of your remaining jump rings to connect your clasp to your 10mm gold jump ring for additional length.   Finally, attach your gemstone drop on one of your large gold jump rings.