Looking for Instructions?

Sterling Marque Bracelet Kit Instructions

Sterling Marque Bracelet KitInstructions for Making a Bracelet:

Step 1: If you're crafting a 7-inch bracelet, begin by centering your clasp on your wire, bringing the ends together and stringing a 3mm seamless round bead, followed by a crystal round bead.

For a 7.5-inch bracelet, add a crystal round, a 3mm bead, and another crystal round.

Step 2: Separate the wires. On each wire, string 5 silver beads.

Step 3: Feed each of the two wires through a Swarovski montee bead.

Step 4: Begin your repeating pattern. On each wire, string:

  • 4 seamless sterling beads
  • 1 rondell bead
  • 4 more seamless sterling beads
  • 1 Swarovski montee

Repeat this pattern a total of 7 times.

Step 5: Once the pattern is complete, add 5 seamless sterling beads to each of the two wires.

Step 6: Bring the two wires together.

For a 7-inch bracelet:

  • Add a crystal bead to the combined wires.
  • Next, string on a crimp tube.
  • Thread the wires through one end of your magnetic clasp, then back through the crimp bead and the crystal bead.
  • Pull both wires tightly, ensuring the bracelet is snug.
  • Use a crimping tool or pliers to secure the crimp tube.
  • Trim any excess wire using wire cutters.
  • Finally, slide a crimp cover over the crimped bead to give it a finished look and gently close it using pliers.

For a 7.5-inch bracelet:

  • Add a crystal bead to the combined wires.
  • String on a crimp tube.
  • Add another crystal bead.
  • Thread the wires through one end of your magnetic clasp, then back through the second crystal bead, the crimp bead, and the first crystal bead.
  • Pull both wires tightly.
  • Use a crimping tool or pliers to secure the crimp tube.
  • Trim any excess wire.
  • Place a crimp cover over the crimped bead and gently close it using pliers for a polished look.

Congratulations! You now have a beautifully handcrafted bracelet.

 

Updated on 05 Jul 2024